7.2
ROTARY MULTI CONTROL VALVE (SAE AND BHL PATTERN)
Make sure you know the location and function of each control before operating.
This machine is factory equipped with the control pattern.
With this control pattern, functions must correspond to the labels located inside of cab.
Stop the engine without fail at time of change over.
The patterns of operation are changeable from / to "SAE" to / from "BHL" position with the lever on
the multi control valve (1) .
A.
Lever of Rotary Multi-Control Valve
1.
Park the machine in condition of parking posture, and stop the engine. And shift safety lock lever
to "Locked position".
2.
Using starter key to unlock doors, Then open door for radiator and air cleaner at left side of
machine.
3.
Remove butterfly bolt (2), and shift the lever (3) to required arrow marked position.
4.
After setting the control pattern, tighten butterfly bolt (2) to fix lever (3) with hand. Never use tools.
5.
Close the doors and lock it.
[
7. OPTIONAL EQUIPMENT
]
7-18
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]