Mirror C
Adjust mirror so that person who stands on the right front of machine (or post of 1.5 m height and
30 cm in diameter) can be identified from operator's seat.
・
Install mirror to the position shown in the figure.
H: 140mm {5.5"} (Reference value)
・
Install mirror so that the mirror (C) does not come in contact with the mirror stay (5).
・
If the movement of mirror (C) on adjusting is not smooth, loosen nut (6) of mirror and adjust it.
Tightening torque of nut (6) M8 : 8.6 to 12.7N
･
m {6.3 to 9.4lbf
･
ft}
・
Regarding visible area, refer to the shaded range on 1.11.
Mirror D
Adjust the mirror so that the ground within the range of 1 m in surroundings behind the machine can
be identified from the operator's seat.
・
Install mirror to the position shown in the figure.
・
Install mirror so that the mirror (D) does not come in contact with the mirror stay (7).
Tightening torque of nut (8) M8 : 8.6 N
･
m {6.3 lbf
･
ft}
・
If the movement of mirror (D) on adjusting is not smooth, loosen screw (9) of mirror and adjust it.
Tightening torque of adjusting screw (9) M5: 2.94 ± 0.98 N
･
m {2.17 ± 0.72 lbf
･
ft}
・
Regarding visible area, refer to the shaded range on 1.11.
［
1. SAFETY PRECAUTIONS
］
1-48
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]
