1: Screen Change Switch
2: Buzzer Stop Switch
3: Work Mode Select Switch
4: Washer Switch
5: Wiper Switch
6: Travel Speed Select Switch
7: Auto Accel Switch
8: Select Switch
9: Attachment Mode Select Switch
8.5 Pump Flow Rate Adjustment (Nibbelr mode / Breaker mode) (Option)
According to some kind of attachment, it is required to change the flow rate for service circuit. Change
the flow rate in accordance with the procedure mentioned below.
In this machine, last set flow rate has been stored and the initial flow rate is 200L/min. The
adjustment (increase or decrease) of flow rate is changeable by 10L/min step.
[
2. MACHINE FAMILIARIZATION
]
2-18
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]