FOREWORD
AVOID INJURY
Read, understand and follow all safety precautions and procedures found in this manual before
attempting any operation, inspection or maintenance of this machine, attachment or systems.
Manufacturer cannot anticipate every possible circumstance that might involve a potential hazard. The
warnings in this publication and on the product are therefore not all inclusive. If a tool, procedure,
work method or operating technique not specifically recommended by manufacturer is used, you must
satisfy yourself that it is safe for you and others. You should also ensure that the product will not be
damaged or made unsafe by the operation, lubrication, maintenance and/or repair procedures you
choose.
GENERAL
・
This manual contains procedures to aid the operator gain peak performance through effective,
economical operation and maintenance of the machine.
・
Before operating the machine, operators must thoroughly read and understand all Safety, Operation
and Maintenance instructions found in this manual. Failure to follow the instructions given in this
manual may lead to serious injury to persons and or equipment failure.
・
Operators and persons working with this machine should continually study this manual until proper
Safety, Operation and Maintenance procedures are completely understood.
・
This manual describes the basic operating techniques. Skill is gained as the operator utilizes these
techniques and perfects them with an actual machine.
・
Some illustrated pictures may be different from your machine, as technical improvement is
continuous, manuals are periodically updated to reflect these changes.
・
This manual may not contain attachments and optional equipment that are available in your area.
Please contact an authorized Manufacturer Distributor for any optional attachments required.
・
The contents of this manual and operation of the machine are based on the use of genuine
manufacturer sourced parts. Use of non-genuine replacement or modified parts is not
recommended.
・
Materials and specifications are subject to change without notice.
PERIODIC INSPECTIONS
・
After delivery of a machine, the Authorized Manufacturer Dealer/Distributor will make periodic
service inspections. These inspections will be free of charge to the owner of the machine and will
be at time intervals set by Manufacturer. Contact an authorized Manufacturer Dealer/Distributor for
any Service related questions not explained in this manual.
NOTICE
・
Owing to the policy of continual improvement, changes may be made by Manufacturer to any of
its products without any obligation on the part of Manufacturer.
[
FOREWORD
]
0-3
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]