kobi KSSK17L, Instruction Manual

7

USING THIS KETTLE

This kettle is only suitable for boiling water . Do not 

boil other liquids in this kettle .

Boiling Water

1 . 

Remove the kettle from the power base, and 

then place the kettle on a stable, level surface 

for filling .

2 . 

Press the lid release button, and then fill the 

kettle with water to the desired level .

NOTE: 

Fill the kettle to at least above the 

"MIN" line but to below the "MAX" line .

3 . 

Release the lid release button to close the lid .

4 . 

Place the kettle back on the power base, and 

then plug the power cord into an outlet .

5 . 

Press the On/Off switch to turn the kettle on . 

The indicator light turns on and the water 

starts heating . 

The kettle will automatically turn off once it 

has boiled the water . 

6 . 

Lift the kettle from the power base, then pour 

the hot water into the desired container .

NOTE: 

•

You can stop the heating process while the 

kettle is operating by flipping the On/Off 

switch up to Off .

•

This kettle has a boil-dry safety feature . 

If there is no water in the kettle, the kettle 

automatically turns off to prevent the power 

base from overheating .

•

If the kettle overheats, fill it with cold water, 

and then wait two minutes before using again .