User manual - DATA RECORDER and cooperating software
Fig. 3.15. Devices adding and removing
(advanced options active)
Downloading of registered data
Downloading of data stored on internal memory can be done in two ways:
• using USB FlashDisk (PenDrive)
• using RS-485 interface
Data downloading from Flash drive and selected localisation
The USB FlashDisk will be automatically detected if inserted to PC USB port, and the
user will be asked for confirmation of data download (if any data available on the inserted
disk).
allows to download data from any localisation (selected directory) by means
of
[Download data (file)]
button. This method should be used only if the logged data was
previously copied manually from FlashDrive to PC hard drive.
Data downloading via RS-485 interface
Default settings of data downloading via RS-485 allow to import only newest data, stored
since last downloading. This method prevents user against multiply downloading of stored
data, and reduces time of data downloading. Date of last download is automatically stored to
internal memory of logger while downloading initialised by pressing of
[Download data
(RS485)]
button.
In some cases there is a need to download already downloaded data again (failure of the
device, errors in database, lost of downloaded data). In such situations it is possible to
download data more than one time, but only if data is not overwritten or damaged.
10
2
Summary of Contents for ZLS-2
Page 85: ...85...
![Lambrecht Ser[LOG] Operator'S Manual preview](http://thumbs.mh-extra.com/thumbs/lambrecht/ser-log/ser-log_operators-manual_3390951-001.webp)
