ENGLISH
13. Connect the motor cable and the lower guide rail to the control box cable
Check that the spoilboard covers the entire area and that the board sensor has been activated.
If necessary, cut one or more additional boards if a spoilboard of the cutting area’s size cannot
be obtained with a single complete board.
15.2
Check that the vacuum cleaner has been connected
correctly.
15.4
15. Checklist
Always follow the safety instructions and the relevant rules.
The checklist MUST be gone through before the power plug is connected to Amigo®.
Are all the electrical plugs on Amigo® connected
correctly and locked?
Are all toogle latches, cotter pins and quick-couplings
locked correctly?
15.3
Observe all cover strips to see if they are intact and mounted
correctly on the gantry, the upper guide rail and lower guide
rail. When errors are observed go to the section: “Mainten-
ance and daily operation”.
WARNING!
Model 912 Rev. 4 20221401
21
Summary of Contents for AMIGO 912
