9
8
10. Imaginary function
9. How to open the door
Incaseofwrongpassword3times,youwillhearwarningsound
`for30secandnumberpadgetsstuck
Door open with RF card
Place RF card on door lock front and lock is opened with melody
Opening door with password from outside
Place hand on keypad or press Start button to lighten keypad.
Press registered password and press “ ” or “#” to open door.
Manner Mode
Pressing Start button will activate manner mode, and door will open with no configuration alarm.
(Auto-setting to non-manner mode after door opening)
Door open in house
Press “OPEN / CLOSE” button
or pull or push the handle
to open the door
➊
Press “OPEN/ CLOSE”
button for 5sec
➋
Press number 2
•
With long beep sound :
Activated
•
With short beep sound :
Deactivated
11. How to close in force
Force lock from outside
Press “Start” button and “#”
for 5sec to complete for lock.
You will hear beep sound
as confirmation.
This is double lock when you
leave home for a long time and
inside buttons are not working.
Force lock from inside
Press “OPEN / CLOSE” button for 5sec and it completes
with melody sound.
This is double lock and outside buttons are not working.
It gets deactivated when you open the lock from inside.
►When “Force lock from outside” activated, “OPEN / CLOSE” button is not working
►When “Force lock from outside” activated, it gets deactivated if you pull or push the handle from inside
►When “Force lock from outside” activated, you can open the lock with password or card
12. Way to register wireless transmission / reception
communication device module for door lock (Optional)
➊
Press right side button
Bleep sound comes out~~
➍
Press
‘ ‘
button on Door
lock to complete
registration and you will
hear same long beep
sound. Bleep Bleep ~~
➌
Press Setting button for 5 sec on Remote
controller and you will hear long beep sound
※
Video door phone screen should be on while
registration
1. Red +
2. Black -
3, 4 Door release wires
Setting button
Remote
controller
How to use
How to use
※Ifyouaddone,youhave
todeleteandregisterall
inorder(Includeremote
controller)
