2-4
A-61316 April 2010
14
Clear/Stop
— clears the setting on the Multi-Print display, resets
the display to 1 or stops a multi-print cycle.
15
Multi-Print
— used to set the number of prints when printing
continuous, multiple pages. The value of this setting increases by
one (1, 2, 3...) with every push of the key. (Maximum 19).
PR mode
only
.
16
Start
— starts the print (scan) process of the displayed image.
Control Panel - Shift
function
The Shift key must be pressed with all of the functions below:
1
User Mode
— enters into User Mode. See
Appendix B, User and
System Settings
for more information.
2
Lamp Illuminance
— the illumination of the screen is adjusted.
When this key is continuously pressed, the screen is gradually
darkened until it is turned OFF. When any key is pressed, the
illumination returns to the maximum level.
3
Resolution
—
sets the resolution of the scanner.
•
When the scanner is connected to the printer: 6H.
•
When the scanner is connected to the PC: 2H, 3H, 4H, 6H and
8H.
NOTE: 4H represents 400 dpi; 6H represents 600 dpi.
4
Job Recall
— when pressed with the Shift key, the program
registration locations (1J, 2J and 3J) are called. Each time this key
is pressed while the Shift key is held down, the display rotates
through 1J, 2J and 3J.
5
Zoom
— sets the electrical zoom magnification.
•
Zoom+:
when pressed with the Shift key, the magnification is
increased by an increment of 0.01X (up to 2.00X).
•
Zoom clr:
when pressed with the Shift key for 1 second, the
standard magnification is resumed.
•
Zoom-:
when pressed with the Shift key, the magnification is
decreased by a decrement of 0.01X (down to 0.50X).
6
Shift
— the Shift key must be pressed when you want to access
one of the functions described in this section.
5 PC/PR
—
when pressed with the Shift key, the connection to the
PC or printer is selected.
This key is not valid unless the optional
USB interface kit is installed.
Auto Skew Correction
Centering/Fit
Masking
Print Mode
Film Type
Darker
Auto
Lighter
Start
Auto
Photo
Fine
Text
Nega
Posi
C
Auto
Manual
Resolution
Job Recall
Zoom +
Zoom clr
Zoom -
PC/PR
Shift
Output
Selection
Cassette1
Cassette2
Tray
User Mode
1
2
3
4
5
6
7