A-61316 April 2010
3-7
Selecting the image
density
Using Auto Exposure
1. Press the
Exposure Mode
Select
key to select the Auto Exposure
mode. The LED to the left of the key lights up when the Auto
Exposure mode is selected.
2. If the Auto Exposure setting is not satisfactory, press the appropriate
Exposure Adjustment key, either
Lighter
or
Darker
, to set the
desired image density.
Using Manual Exposure
1. Press the
Exposure
Mode
Select
key and select the Manual
Exposure mode. The LED to the left of the key lights up when the
Auto Exposure mode is selected
2. Press the appropriate Exposure Adjustment key, either
Lighter
or
Darker
, to set the desired image density.
NOTE: When the
Lighter
and
Darker
keys are pressed together,
the exposure level comes to the center.
Entering the number of
prints
This function is only available in PR mode.
• Enter the desired number of prints using the Multi Print key.
NOTE: The maximum number that can be entered is 19.
Correcting a number
• Press the
Clear/Stop
key, which resets the number on the Multi-Print
display to “1”.
Darker
Auto
Lighter
Darker
Auto
Lighter