A-61316 April 2010
3-11
Using Manual Masking
NOTES:
• Under the PC mode, the print (scan) area can be defined using the
Manual Masking panels.
• The Trimming and Masking functions cannot be used in the PC
mode.
The optional Manual Masking Kit allows you to specify an area of
printing of the displayed image through two separate features: trimming
and masking.
Selecting Trimming
• Press the (manual)
Masking
key to select
Trimming
. The lights on
the panel light up according to the currently selected paper size and
print position.
NOTE: You can print the area specified by the green lights. The lights
which do not match with the selected paper size and the print
position may light up just after the Job Program is called.
Defining the print area
Define the end points for both the vertical and horizontal areas of the
image on the screen using the green lights on the area indication
panels.
NOTE: The points defining the vertical and horizontal area can be
selected in any order. Blinking lights on the indication panels
indicate an improper entry of the specified area.
Masking
Auto
Manual
On
On
11 x 8 1/2”
A4
