A-61371 April 2010
2-1
2 Control Panel and Functions
Following are descriptions of the Control Panel functions. Some
functions are available by using the Shift key and some of the functions
provide access to optional accessories. This chapter provides an
overview of each function and a description of image processing
features. Chapter 3,
Using the Scanner
, provides procedures on how to
use each function.
Control Panel - Standard
1
Memory Input Key
— to store one of the following functions into
the memory of the scanner, set one of the functions on Control
Panels 1 and 2 and then press the pinhole with the head of a pen
or other device. The next time the scanner is turned on, that
function will appear as a default setting until a new one is entered.
A maximum of three settings can be memorized.
• Negative or positive
• Print mode
• Print position*
• Paper size*
• Print image density
• Exposure mode
• Centering or Fit
• Manual Masking
• Auto Masking
• Auto Skew Correction
• Horizontal Area setting
• Vertical Area setting
• Electronic Zoom magnification
• Resolution
• Image Distortion Correction
* If the current paper tray or cassette is different from the paper tray/cassette that
is loaded when the Paper size setting was made, Center Image Print is selected
for the print position and the current paper size is selected.
NOTE: If you do not press the pinhole within 60 seconds after a setting
has been made with the Auto Reset function set to On, the
previous setting remains valid.
Start
10
1
C
Auto
Lighter
Darker
Exposure
Paper Selection
Print Position
Print Mode
Text
Fine
Photo
Film Type
Auto
Nega
Posi
1
2
A4
A3
A4
Paper Selection
11
×
17
1 2
/
8
×
11
8
×
11
8
×
14
1 2
/
Ohter
1 2
/
1
2
3
4
5
6
7
8
9
12
13
14
10
11
15
