Windows for WorkGroups (3.x)
5-2
July 1998
W
I
N
D
O
W
S
3
X
Adding a Printer to Your System
Use the following procedure to add a printer, install a PostScript driver
and select a server print queue. If needed, refer to the documentation and
software provided with your system.
For general information regarding potential third-party solutions and tools,
refer to Appendix B. Kodak is not responsible for troubleshooting
solutions done by vendors.
1. From the
Main
menu, double-click on the
Control Panel
icon.
2. From the
Control Panel
, double-click on the
Printer
icon.
3. Click on the
Connect
button.
4. From the
Connect
window, select an appropriate
LPT
port to use for
the printer from the
Ports
menu.
The Kodak printer should appear in the
Installed Printers
menu
within the Printer Control Panel if the PostScript driver was installed.
5. Click on the
Network
icon.
6. In the
Network Printer Connections
window, click on
Servers
and
select an appropriate server from the list. Log in to the server, if
necessary. Select the
Printers
icon and then an appropriate
queue
from the list.
7. Select
LPT Settings
. To eliminate extraneous banner (USER ID)
pages, make sure that the
Enable Banner
feature is not selected.
8. When Þnished, click on
OK
and close windows where appropriate.
