To learn more about solutions from Kodak:
Visit graphics.kodak.com
Produced using
Kodak
Technology.
Eastman Kodak Company
343 State Street
Rochester, NY 14650 USA
©Kodak, 2012. Kodak, Prinergy, Prinergy Evo, Quantum, Staccato,
square
spot,
Sonora and Trendsetter are trademarks of Kodak.
Subject to technical change without notice.
W.PS.319.0312.en.07
Trendsetter
400 Platesetter
General specifications
Technology
830 nm thermal imaging platesetter, semi-automatic, external drum
Load/unload systems
Standard: Semi-automatic plate loading and unloading
Auto Unload: Semi-automatic plate loading and automatic unloading to plate processor or stacker;
automatic plate rotation
Autoloader: Automated plate loading and unloading of up to 40 plates without slip sheets (0.3 mm)
Performance specifications
Throughput at 2400 dpi
1, 2
for plate size 724 x 838 mm
(28.5 x 33 in)
Standard and Auto Unload:
S speed = 20 plates per hour
F speed = 30 plates per hour
V speed = 43 plates per hour
Autoloader:
S speed = 22 plates per hour
F speed = 33 plates per hour
V speed = 50 plates per hour
Repeatability
3
±
5 microns (
±
0.2 mil) between two consecutive exposures on the same plate left on the drum
Accuracy
3
±
20 microns (
±
0.8 mil) between two plates imaged by different
Trendsetter
Platesetters
Registration
3
±
25 microns (
±
1.0 mil) between image and plate edge
Workflow connectivity
Kodak Prinergy Evo
Workflow,
Kodak Prinergy
Workflow, and connection to third-party
workflow systems
Imaging specifications
Resolution
2400 dpi (94.4 dpmm) or 1200 dpi (47.2 dpmm)
Screening
Trendsetter
400 Platesetter:
• 250 lpi max line screen
• Optional 25-micron
Kodak
Staccato
Screening
Trendsetter
400
Quantum
Platesetter:
• 450 lpi max line screen
• Optional: 20- or 10-micron
Kodak Staccato
Screening
Maximum plate size:
around drum x along drum
4
838 x 990 mm (33 x 39 in)
Minimum plate size:
around drum x along drum
4
Standard:
267 x 215 mm (10.5 x 8.5 in)
Auto Unload:
383 x 270 mm (15.1 x 10.6 in)
Manual unload:
267 x 215 mm (10.5 x 8.5 in)
Autoloader:
383 x 270 mm (15.1 x 10.6 in)
Manual load and unload:
305 x 215 mm (12 x 8.5 in)
Maximum image area:
around drum x along drum
827.9 x 990 mm (32.6 x 39 in)
Physical characteristics
Size (H x W x D)
Standard:
160 x 200 x 120 cm
(63 x 79 x 48 in)
Auto Unload:
210 x 200 x 180 cm
(83 x 79 x 71 in)
Height is to top of unload table in
raised position.
Autoloader:
210 x 200 x 180 cm
(83 x 79 x 71 in)
Weight
650 kg (1,433 lbs)
744 kg (1,640 lbs)
750 kg (1,653 lbs)
1 Imaging speed and throughput is dependent on media sensitivity. All values are for media sensitivity of 120mJ/cm
2
2 Tested with Kodak Workflow Solutions. For additional information about the test conditions, please consult your Kodak representative.
3 For devices that are not
Quantum
models, these specifications pertain to performance at largest plate size, over constant temperature.
For
Quantum
devices, specifications pertain to performance at largest plate size, over full temperature range.
4 Standard plate gauge is 0.14 to 0.3 mm (0.0055 to 0.012 in). Option available for plate gauge of 0.14 to 0.4 mm (0.0055 to 0.016 in)
For plate gauges 0.14 to 0.2 mm (0.0055 to 0.08 in) there may be some differences in min and max. plate sizes. For more information, please consult your Kodak representative.
The platesetter is a Class 1 Laser Product and fully complies with EN60825-1 and US Federal Regulations 21 CFR 1040.10 - CDRH.
