2-14
October 2020
Setting Up the Printer
Important:
Ribbon must be loaded in the printer (see
) before the paper automatically
loads and advances.
13. Insert the edge of the paper between the metal roller and
black roller at Paper
1.
Important:
Make sure that the paper is straight. If paper is not
aligned properly, rotate the paper roll back and insert the
paper again.
14. Feed the paper through the slot at Paper
2 until the light in
the printer turns blue.
Note: If the blue light turns off, remove the paper and reinsert it
into the slot at Paper
2.
Paper 1
A200_0012H
Remove Paper
OK
Paper
2
Paper Set
P