5-4
October 2020
Troubleshooting
Clearing a Paper Jam
If a
Paper Jam
message appears on the software operator control
panel, follow this procedure. If a paper jam occurs in the slitter, or
Paper Jam 70 -79
appears on the software operator control panel,
see “Clearing a Slitter Jam from the 6950 Printer” on page 5-8.
1. Move the power switch to the Off (
) position.
2. Remove the exit tray (if installed).
3. Remove and empty the trim tray.
4. Clear any debris from the exit.
Exit Tray