October 2020
A-1
Appendix A: Safety and Regulatory
Information
Important Safety Information
CAUTION
:
Use of controls or adjustments or performance of
procedures other than those specified in this manual may
result in injury and/or damage to the printer.
• The power outlet should be easily accessible and installed
near the printer.
• Position the power cord so that it cannot be pulled on or
tripped over.
• Never allow the power cord to contact hot surfaces.
• The power outlet must be grounded. An ungrounded outlet
can cause fire, electric shock, or harmful interference to
nearby electrical devices.
• Use only the power cord provided with the printer.
• Do not operate the printer with a damaged power cord.
• Always unplug the power cord from the printer before
cleaning or when the printer is not in use.
• If the printer has been dropped or damaged, make sure a
qualified service person examines the printer before you use
it.
• Do not block the filter openings on the printer cabinet.
• Do not expose the printer to moisture or water.
• Do not allow any foreign objects or liquids to fall or spill inside
the printer. Fire or electric shock could result.
• The thermal print head becomes extremely hot during normal
operation. Do not touch it.
• Alcohol pads are used to clean the thermal print head and
other internal printer components. Consult the
manufacturer's Safety Data Sheet prior to use. In case of
emergency, use the contact telephone number listed in
Section 1 of the Safety Data Sheet.