3-2
Maintaining the Printer
Cleaning the Thermal Print
Head and the Peel Roller
1. Make sure the power switch is turned off (
).
2. Carefully open the top cover.
CAUTION:
The thermal print head becomes extremely hot during
normal operation. Wait approximately five minutes after
you open the top cover before cleaning it. Fingerprints can
damage the thermal head. Never touch it with your bare
hands or fingers.
3. Remove a new alcohol pad from its packaging. Move the pad
along the entire length of the thermal print head, in one
direction only. When you clean the thermal head:
• Apply firm, even pressure.
• Make three passes along the thermal print head.
• Use a clean part of the pad for each pass.
4. Use another clean alcohol pad to wipe the peel roller.
5. Allow the alcohol to dry completely (about five minutes)
before you resume printing.
6. Close the top cover.
Thermal head
CAUTION:
HOT
Peel roller
Summary of Contents for Apex 7015
Page 1: ...KODAK 7015 Photo Printer 7015 Photo Printer User s Guide ...
Page 22: ......
Page 38: ......
Page 42: ......