Troubleshooting
www.kodak.com/go/support
41
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
■
Check the image storage location setting (
see page 24
).
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■
Transfer the picture to the computer (see
page 36
), then format the
card in the camera (
see page 26
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Shutter button
does not work.
■
Turn on the camera (see
page 2
).
■
Transfer pictures to the computer (see
page 36
), delete pictures from
the camera (see
page 14
), switch image storage locations (
see
page 24
), or insert a card with available memory (see
page 3
).
Picture is too light.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Decrease Exposure Compensation (see
page 27
).
Picture is not clear.
■
Clean the lens (
see page 52
).
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
■
Turn on the flash (see
page 7
).
■
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
■
Use Fill flash (
see page 7
) or change your position so light is not
behind the subject.
■
Increase Exposure Compensation (see
page 27
).
If...
Try one or more of the following
