40
www.kodak.com/go/support
Troubleshooting
Camera/computer communications
Ready light blinks
green.
■
Camera is operating normally.
Ready light blinks
amber.
■
Wait. Resume picture taking when the light stops blinking and turns
green.
Ready light blinks
red and camera
turns off.
■
Install new batteries (
page 1
) or charge rechargeable batteries.
Ready light glows
steady red.
■
Transfer pictures to the computer (
page 13
), delete pictures from the
camera (
page 11
), switch image storage locations (
page 21
), or insert
a card with available memory (
page 3
).
■
Wait. Resume picture taking when the light turns green.
■
Change the image storage location to internal memory (
page 21
), or
use a different card.
Ready light glows
steady green.
■
Camera is operating normally.
If...
Try one or more of the following
The computer does
not communicate
with the camera.
■
Visit
www.kodak.com/go/c633support
.
■
Turn on the camera (
page 2
).
■
Install new batteries (
page 1
) or charge rechargeable batteries.
■
Connect cable to camera and computer port (
page 13
).
■
Install the software (
page 12
).
■
Disconnect the USB cable. Close all open applications. Re-install the
software (
page 12
).
■
Disconnect camera from the computer. Close all software applications,
reconnect camera.
If...
Try one or more of the following
