1-6
Setting Up the Printer
13. Match the coloured flanges with the slots of the same colour
on the printer, then carefully lower the paper roll into the slots.
14. Remove the label.
15. Close the paper holder.
IMPORTANT:
The ribbon must be loaded into the printer
(see
“Loading the Ribbon” on page 1-7
) before the paper
automatically loads and advances.
16. Close the front door.
The printer loads the paper. It then prints a blank sheet—the portion
of the roll that may have fingerprints as a result of handling. The
printing of this sheet does not decrease the print capacity of the roll.
Depending on the size of ribbon that is loaded, the operator panel
displays
10 x 8 YMC-YMC
or
12 x 8 YMC-YMC
.
