DIAGNOSTICS
Using the Logs
30JUL07
8F2919
Page
323 of 326
DICOM Log
This is a subsystem log that includes all MIM Network “events” pulled from an Application
Log. Note that the Subsystem “column” includes only Network. See Sample Log 1 at the end
of this section for descriptions of the “events” in the log.
ERROR TALLY Log
The logs include 2 lists of errors.
•
A “Current Tally”, which lists the number of errors that have occurred from when the count
for the errors was reset to 0.
•
A “Lifetime Tally”, which lists the total count of all errors that have occurred during the
operation of the IMAGER.
1
To access these logs, connect your LAPTOP to the SERVICE TOOL and select
Logs>Error Tally
. The “Current Error Tally” will display.
Note
The error codes in the “tally” are by application: “DV6800”, “MIM”, or “Service Platform”.
a
To reset the count for any error to 0, click [Select] for that error and then click
[Reset] at the bottom of the screen.
b
If you want to reset the count for all errors in the list, click [Select All] and then
[Reset].
2
To access the “Lifetime Tally”, select “Lifetime”. Note that this screen does not include the
Reset function.
3
To save:
a
Click [Save] on the bottom of the ERROR TALLY screen.
b
In the “Save Copy As” window, select the File Name of the folder on your LAPTOP
to save the “Tally” in.
