4
www.kodak.com/go/support
Getting started
Loading and removing the cartridge
IMPORTANT:
Replace the cartridge when the Cartridge light glows red (see
Status lights,
page 28
).
The cartridge may lock if there is a paper error. Clear the paper error (see
Printing problems, page 21
) and make sure the Paper light is off before
you remove the cartridge.
1
2
3
Cartridge-release tab
Open the Cartridge door.
Insert the cartridge into the
chamber until it clicks into place.
4
Close the door.
Rotate the cartridge spool
clockwise just enough to remove
the ribbon slack.
IMPORTANT:
Too many rotations
may reduce the number of prints
you can make.
•
To remove the cartridge, push
Cartridge light
•
Replace the cartridge when the
Cartridge light glows red.
up on the Cartridge-release tab.