2-12
5E2234
June 2000
Overview
Status Section
Initializing
The Laser Imager is in the process of
warming up.
Printing
The Laser Imager is in the process of
printing films. The Laser Imager is also
accepting commands and data from the
MIM.
Not Printing
The Laser Imager has stopped printing
films. Any pages that are already in
progress will finish printing. The Laser
Imager accepts commands and data in
this state.
Ready
The Laser Imager is ready to print. The
Laser Imager accepts commands and
data in this state.
Testing
The Laser Imager is not printing films
from the imaging devices, but is printing
test films or transporting films. The
Laser Imager is accepting commands
and data from the MIM.
Offline
The offline condition is shown in a right-
justified position on the Status Line.
When offline, the Laser Imager is not
accepting commands or data from the
MIM. The offline condition may exist
during power-up diagnostics and initial-
ization, after certain errors and when
diagnostics are run by a Service Repre-
sentative.
