www.kodak.com/go/aiosupport
73
KODAK HERO 7.1 All-in-One Printer
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies. When you copy a photo, the
printer will use paper from the top paper tray, unless you specify otherwise.
Using the default settings to copy a photo
The default settings are either the factory default settings (
see Resetting factory
defaults, page 104
), or defaults that you have set on the printer (
see Save as
Defaults, page 75
).
To copy a photo using the current default settings:
1. Lift the scanner lid, and place the photo face down in the right-front corner of
the scanner glass.
2. Close the lid.
3. Press .
4. Touch
Copy Photo
.
5. Press
to begin copying.
