www.kodak.com/go/aiosupport
125
KODAK HERO 9.1 All-in-One Printer
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer: one that indicates power, the other indicates Wi-Fi status.
Power status light
Wi-Fi status light
Power light
What it means
Off
• The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the back
of the printer and into an electrical outlet, and that the
electrical outlet has power.
Blinking
The printer is busy.
• Wait for the printer to finish the task.
On
The printer is ready.
Wi-Fi status light
What it means
Off
The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
Blinks continuously
The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
Blinks intermittently
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted or is too weak to send signals.
To find and connect to an available wireless network within
range, turn the Wi-Fi radio off, and run the Wi-Fi Setup Wizard
(see
Connecting to a wireless network, page 9
).
On
The Wi-Fi radio is turned on and there is a working connection
between the printer and a wireless network.