Copying
72
www.kodak.com/go/aiosupport
Two-sided copying
Manual two-sided copying
If the original is not on letter or A4-sized plain paper, or if you want the copy to be on
paper other than letter or A4-sized plain paper, you can make two-sided copies
manually.
To make a two-sided copy:
1. Load the paper into the paper tray.
2. Place your original on the scanner glass (see
Using the scanner glass, page 51
).
3. Press .
4. Touch
Copy Document
.
5. If necessary, touch
Options
to make changes to the copy settings.
6. Press
to begin copying.
7. Remove the printed page from the output tray and rotate it 180 degrees, then
place the page into the paper tray (printed side up).
8. Place the next original on the scanner glass.
9. If necessary, touch
Options
to make changes to the copy settings.
10. Press
to begin copying.
