background image

1-2

A-61771 March 2013

Accessories

Kodak Printer Accessory for the i2900/i3000 Series Scanners 

— the 

Printer Accessory provides an effective way to apply information to the rear 
side of the scanned document. It operates at full scanner speed. The printer 
can add a date, time, document sequential counter and custom messages. All 
printer controls and functions are accessible through the TWAIN Datasource or 
ISIS Driver. CAT No.132 4391

Kodak A3 Flatbed Accessory 

— the 

Kodak 

A3 Flatbed adds scanning 

capability for exception documents up to 11 x 17-inch (A3) size paper to your 

Kodak 

i3200/i3400 Scanner. CAT No. 189 4351

Kodak Legal Size Flatbed Accessory

 — the 

Kodak

 Legal Size Flatbed 

Accessory allows you to scan exception documents with your 

Kodak

 

Scanners. The cable included with the Flatbed Accessory easily connects your 
flatbed to the host PC. CAT No. 119 9470

Document Extenders for Kodak i3000 Series Scanners

 — allows you to 

scan documents longer than 17 inches (43.2 cm). Part No. 5K2230

What’s in the box

Before you begin open the box and check the contents: 

Kodak

 i3200 or i3400 Scanner

• USB 3.0 cable

• AC power cord bundle (with 60W power supply)

• Also included:

- Installation CD 
- Application CDs 
- Warranty/Registration sheets
- Printed User’s Guide, English
- Printed Reference Guide 
- Printed Installation Guide/First Scan
- Sample Cleaning Kit
- Service & Support Contact Information sheets
- Miscellaneous flyers

Summary of Contents for i3200



















































Reviews: