Versitec 1- 888 - 722 - 6548 www. versitec.com
19
Be sure to line up the slots on the separation roller with the holders.
NOTE:
5
Push the separation roller holder back in place.
6
Lower the roller cover.
7
Close the swing out door.
Replacing the separation roller tires
To replace the separation roller tires:
1
Remove the separation roller as previously directed.
2
Replace each tire by sliding the tire off the core.
3
Install each new tire by gently stretching it over the core.
4
Reinstall the separation roller as previously directed.
Do not overstretch the tire; it may tear.
IMPORTANT
Changing the separation pad
Change the pre-separation pad when the frequency of
double-fed documents increases.
1
Open the swing out door.
2
Lift the roller cover.
3
Remove the pre-separation pad.
Summary of Contents for i800 Series
Page 3: ......
