A-61176 November 2001
5
Environment
Following are environmental considerations:
Heat Dissipation
4009 kj/hour (3800 Btu/hour) maximum
Acoustic noise
•
Operator position standby mode:
−
Sound Pressure Level (L
A
):
39.8 dB(A)
•
Operator position full system operating mode:
−
Sound Pressure Level (L
A
):
65.4 dB(A)
−
Instantaneous Peak Values >130 dB(C)
None
•
Sound Power Level (L
WA
):
−
Standby
56.4 dB(A)
−
Full System
72.0 dB(A)
NOTE: All data was measured in accordance with DIN 45635, ANSI
S12.10-1985, and ISO 7779 in a hemi-anechoic chamber.
Safety, regulatory
conformance, and
certifications
The
Kodak
i800 Series Scanners conform to all applicable national and
international product safety and electronic emission regulatory
requirements. This includes, but is not limited to, the following:
•
UL
•
CUL (CSA 22.2 No. 950 standard)
•
TUV / GS Mark
•
C – Tick Mark
•
EN 55024
•
EN 55022 Class A
•
US - FCC, CFR47, part 15, Class A
•
Canada - ICES 003, Issue 3, Class A
•
Japan - VCCI Class A
•
Taiwan - CNS 13438 Class A
•
Australia / New Zealand - AS/NZ 3548 Class A
•
CE Mark
•
Certifying Body Certificate
Grounding requirements
The i800 Series Scanner can be on the same line as the host PC. The
power cord must be used with a properly grounded outlet (15 amp
duplex outlet). No devices other than the host PC should be on the
same outlet as the scanner.
Power extension cords should not be used with the scanner or the host
PC.
An uninterruptible power supply is acceptable as long as it meets the
minimum power requirements.
