A-61096 June 1999
5-23
Replacing the rear
Document Scanning
Array lamp
The rear Document Scanning Array lamp should be replaced whenever
a message appears in the status display indicating that the lamp needs
to be replaced.
NOTE:
If the replacement lamp is a different color than the one being
replaced, contact your service representative to perform
required power supply adjustments.
1. Turn the side panel switch off.
2. Open the front cover.
3. Locate the roller plate.
4. Grasp the roller plate handle.
Document Scanning Array
Roller
Feeder top cover
Roller plate handle
5. Tilt the roller plate toward the back of the machine.
6. Remove the roller plate by carefully guiding it between the feeder
top cover and the roller which is located in front of the Document
Scanning Array.