Kodak PPS800, User Manual

11

6. WALL CHARGING

before use or storage, plug your kodak ppS800 into the wall until it is fully charged. if the display shows 

less than 20% capacity, plug it into a power source, like an ac outlet or a solar panel as soon as possible. 

to fully charge the kodak ppS800, it will take about 7 hours.

ATTENTION

Do not use KODAK PPS800 while charging via wall outlet!

only charge the unit when the ambient temperature is between 0°c to +45°c (32°f to 113°f).

end the charging process by switching off the unit and pulling the plug out of the socket.

connect your kodak ppS800 to pV (Solar panel) and then to the Solar charging port. with a 100w input, 

e.g. using the kodak Solar panel Sp100, it will take approximately about 10 hours, depending on weather 

conditions and positioning of the solar panel. 

ATTENTION

Using KODAK PPS800 while charging via solar panel is possible.

No. Alarm

LCD Screen

Causes

1

every 1 sec.

                    low battery icon keeps flashing until battery  

                    is charged above 20%

battery capacity <20%

2

every 1 sec.

        warning icon keeps flashing until failure is resolved

charging failure

3

every 2 sec.

dc output failure

4

every 3 sec.

ac output failure

5

every 4 sec.

over temperature

6.1. PV (SOLAR PANEL) CHARGING

6.2. DISPLAY

Solar input

warning

discharging indicator

ac output

charging indicator

uSb

dc output

cigarette lighter

ac input