Kodak PPS800, User Manual

13

8. USING THE KODAK PPS800

Initialization of the device

press the button to turn on the device. it starts initialization and self-checking, and during this process, all 

the icons are activated on the led screen. after initial self-checking finished and if it functions normally, 

the led screen will turn to normal display.

USB Ports

kodak ppS800 has 3 separate uSb ports, with different output currents of each 

one (see the technical specification for more details). you can use different uSb 

ports according to your power request, while you are not allowed to connect 

these 3 uSb ports together and used to charge one device. 

when kodak ppS800 detects the uSb load, the uSb iconon the led screen is 

displayed and the discharging ring on the right side of led screen starts flowing.

6mm Ports

kodak ppS800 has two 6mm (dc6514) outputs, with the same output power of 

each one. you can charge your devices by plugging into dc ports. when kodak 

ppS800 detects the load, the 12V dc icon on the led screen is activated and 

the discharging ring on the right side of led screen starts flowing. 

Cigarette Lighter Port

when kodak ppS800 detects the load, the cigarrette lighter icon on the led 

screen is activated and the discharging ring on the right side of led screen 

starts flowing.

AC output

when kodak ppS800 detects the load, the ac output icon on the led screen is 

activated and the discharging ring on the right side of led screen starts flowing. 

press the ac output switch and indicator lights up: the ac output function is 

active. now all your electronics can be connected to kodak ppS800 for using. 

press the ac output switch again to turn off the ac output. the interval between 

2 starts should not be less than 5 seconds.

NOTE

when the battery capacity is below 5%, dc output functions (uSb ports, 6mm ports, 

cigarette lighter port) and ac outputs will be automatically disabled.

LED Flashlight

kodak ppS800 has an integrated led flashlight. it has 5 lighting modes: high bright (100% power),  

eco mode (50% power), energy saving mode (25% power), emergency flash and SoS signal. 

press the button once to turn on/off the light, and press gently to shift different modes.