2-4
A-61601 June 2010
6. Picture Saver Scanning System installation includes a required
Product Registration step. Product registration must be completed
to use the Picture Saver Scanning System software application. An
Internet connection is required to complete Product Registration. If
you do not have an internet connection, contact Kodak Support
(refer to Chapter 7, “Contact Information”).
NOTE: You will need the scanner serial number for product
registration. The scanner serial number is located on the
bottom of the scanner and on the shipping carton.
7. Click
Finish
when the installation is complete.
8. Remove the Installation CD from the CD-ROM drive. The Picture
Saver System application shortcut will be placed on your desktop.
9. Restart the PC.
Output tray options
There are three output tray options for the scanner:
• Using the standard output tray
• Using the optional output tray kit
• Not using either output tray
Select the output tray option that works best for your work setup.
Attaching the standard
output tray
1. Slide the standard output tray underneath the scanner platform
along the center guide.
2. Push it all the way back until it snaps into place.
