background image

A-61601   June 2010

6-1

6

Achieving Good Quality Images

Contents

Scanning environment .................................................................... 6-1

Handling photographs..................................................................... 6-1

Keeping your scanner clean ........................................................... 6-3

Photo scanning ............................................................................... 6-4

Streak removal ................................................................................ 6-4

Banding........................................................................................... 6-5

Scanning 
environment

Dirt and dust can hinder photo scanning operations by adding streaks 
to digital images. Dirt and dust can also promote scratching of photos, 
both during and after scanning.

Follow these recommendations to keep your scanning environment as 
clean as possible:

• Vacuum the scanner and the surrounding area frequently.

• Keep your scanning environment as free from dirt and dust as 

possible. Use care when dusting surfaces around the scanner. 
Dusting quickly and carelessly just redistributes dust in other 
surrounding areas. 

• Use the dust cover when the scanner is not in use. When removing 

the dust cover from the scanner, if the dust cover has accumulated 
dust, carefully remove the dust cover and shake it free of dust in a 
location away from the scanner. 

• Use the scanner in an area where the relative humidity is at least 

50%. Dry environments leads to static which promotes the 
accumulation of dust.

Handling 
Photographs

Be sure your photos are clean before scanning them. Scanning dirty 
photos may cause more dirt and dust to accumulate in the scanner. To 
minimize dirt and dust build-up in the scanner and prevent possible 
streaking, consider the following: 

Wear gloves

 — wearing cotton gloves while handling photographs 

may reduce the oils from your hands getting on the photos and 
minimize the amount of dirt and dust that collects in the scanner. 

Cleaning photos

 — gently vacuum older prints that appear to be 

dusty. An alternative approach to cleaning photos is to use a 
microfiber cloth (included with the Brillianze Detailer wipes) or similar 
wipes available from a photo retailer, which are lint-free, ultra-soft 
disposable non-abrasive wipes. They are safe to use on emulsions, 
optics, scanners and CD’s. Dust should always be removed in a way 
that will not harm the original photo.

Summary of Contents for PS400 Series























































































Reviews: