PROJECTOR SETUP:
TO DISASSEMBLE:
FOR EXTRA STABILITY OUTDOORS:
•
For rear projection, set your projector up behind the screen.
•
For front projection, set your projector up front of the screen.
(Make sure projector has clear line of sight of the screen and no people
are blocking the projection.)
1.
Disconnect the support braces from the legs.
2.
Fold up the front piece of the legs then lay the frame down on a flat surface.
Then, detach the legs from the frame.
3.
Detach the screen fabric from the frame and fold up the frame.
4.
Once everything is folded up, pack the contents into the included carrying bag.
1.
Fold up the front piece of the legs then lay the frame down on a flat surface.
2.
Fasten a silver loop to the top corner of the frame.
11
