background image

Operator’s Guide  

Printing File Print 

Prerequisites 

• 

The RP 30 Laser Printer only accepts jpg, bmp and uncompressed tif file formats. 
Save any files created with Adobe Photoshop to one of these formats. 

• 

Digital cameras have Gamma values between 1.8 and 2.2. The RP 30 Laser 
Printer prints with a Gamma of 1.8. 

• 

The maximum single file size is 110 MB (tif, bmp, jpg unpacked). Larger files will 
not print. 

• 

Adjust the print size to the aspect ratio of the image (indicated by 

.... x .... pixels

). 

For extreme deviations, which the program can no longer process, the system 
displays the error message 

File print parameter range violated

• 

Types of image/paper adjustment: 

− 

Fit image to paper 

− 

Fill print size 

• 

The quality of the prints depends on the relationship between resolution and print 
size. The minimum acceptable resolution is approximately 100 pixels per cm (200 
pixels per inch). 

IMPORTANT: 

For images created with Adobe Photoshop: 

• 

Save files in tif, bmp, or jpg formats. 

• 

Use a Gamma value of 1.8. 

• 

Convert CMYK (additive colors) to RGB (subtractive). 

6-12 

 

KODAK PROFESSIONAL RP 30 Laser Printer 

Summary of Contents for RP 30












































































































































































































































Reviews: