3-8
A-61601 February 2010
Sharpen Images
— sharpens the focus and edges of the scanned
image. If this option is selected, all photos within the batch (the stack of
photos to be scanned) will be sharpened unless the setting is changed
again.
The options are:
•
None
: no sharpening will be done. This is the default.
•
Low
: low amount of sharpening applied.
•
Medium
: medium amount of sharpening applied.
•
High
: high amount of sharpening applied.
NOTE:
Low
or
Medium
are the recommended sharpen settings in most
cases where sharpening is desired. This option is not
recommended for grayscale images.
Compression
— select one of the following compression settings.
Best
is the default.
•
Best
— optimum compression, best image quality. Creates a smaller
file size than
Superior
compression. Select
Best
if you want
standard size reprints of scanned image files.
•
Superior
— minimum compression, superior image quality. Creates
a file that is 5 to 10 times larger than
Best
compression, which will
impact performance. Select
Superior
if you want to reprint
enlargements of scanned image files.
Transport timeout
— allows you to set the amount of time the scanner
will wait after the last photo enters the transport before the transport
timeout action is taken. You can specify a time delay setting from 1 to
20 seconds to allow more time to insert the next photo or document into
the current batch.
Output Media
— determines whether files are partitioned to fit onto a
CD
or
DVD
based on file size.
•
Prompt for Media:
if selected, you will be asked to select
CD
or
DVD
output after scanning is complete.
