2-12
A-61544 July 2008
3. If you want to change any of the image processing settings, select
the Settings button at the bottom left of the screen and select the
setting(s) you want to change.
The current settings are displayed along the bottom of the screen.
For more information about changing settings, refer to the section
entitled, “Customizing the Scan Station using a personal
configuration file on a USB flash drive” later in this chapter.
4. Press the green
Go
button on the control panel. The Destination
Review screen will be displayed.
For a quick review of the settings select the
Output
button on the
lower left-hand corner of the Destination Review screen.
Select
to change
image
processing
settings
