English
59
Status messages
LCD messages
LED behaviors
Unit status or possible causes
Refer to
Communication failure
Ready
(No Error message)
Communication failed on the unit.
– Check the AC plug is connected to the AC
outlet properly, the unit is turned On, or the
connection environment (USB, Wireless) to the
unit. Then follow the procedures by showing the
help text on your connected unit.
• If this error occurs occasionally, refer the
latest troubleshooting to visit our website at
www.kodakverite.com/support
• If you cannot solve the problem, disconnect
the AC plug and contact an authorized service
center.
Insert Paper
Insert Paper
Please insert paper
and press
OK
.
Back
OK
Start
blinks as pattern 1
Insert Paper.
– Check the paper support.
• Set specified paper in the paper support, and
then press
.
“Insert paper into the paper
support”
on page 25.
Paper Jam
Paper Jam
Clear jam and
press
OK
.
OK
blinks as pattern 1
A paper jam has occurred inside of the unit.
– Firmly grasp the paper, and then gently pull it
out.
Press
, to restart the rest of the print job.
• If you want to cancel the print job, then press
.
“Clearing paper jam in
the unit”
on page 52.
Check cartridge lock
Cartridge Error
Please check
ink cartridge lock.
And retry by
OK
.
OK
blinks as pattern 1
An ink cartridge is not installed correctly.
– If the packaging paper is stuck in the ink door,
remove it.
– Reinstall the cartridge, then close the lid completely.
• Confirm the ink cartridge is correctly installed,
then press
.
"Unpack" on page 11.
"Install ink cartridges" on
page 12.
"Changing the ink cartridge"
on page 51.
Status messages, LCD messages and LED behaviors
The Status information will report problems with the unit. Take the proper action by referring to the following table.
»
Refer to “Check print status from your PC” on page 24.
Wireless LED
— indicated by
ECO LED
— indicated by
Power LED
— indicated by
Continued on next page.
•
LED lighting patterns
Blinking 1
Lights up for 1 sec.
No light for 1 sec.
Blinking 2
Lights up very rapidly
No light for more than 1 sec.
Blinking 3
Blinking very rapidly 2 times
No light for 1 sec.
Blinking 4
Blinking very slowly
Blinking 5
Blinking slowly
Blinking 6
Blinking rapidly
Blinking 7
Blinking very rapidly
Blinking 8
Blinking very rapidly 4 times
No light for 2 sec.
Blinking 9
Blinking slowly (in Power-on mode)