Status messages
LCD messages
LED behaviors
Unit status or possible causes
Refer to
Printing is not
possible when the
material type is
Custom.
Cra Print
Custom material
cannot print. Use
Kodak Cra App to
select custom material.
-
When the material type is custom and
Windows PC driver send print job.
–
When the material type is custom, carried out
printing in other than dedicated application.
–
Please use Kodak Craft App to select custom
material.
●
To cancel printing, press
.
Copying is not
possible when the
material type is
other than Paper.
Copy
Selected material is not
supported for Copying.
Press and
select Paper.
-
Attempting to copying with material except
paper.
–
When the material type is except Paper, cannot
be performed copying.
●
To cancel copying, press
.
<Alignment in
progress...>
<Alignment in
progress...>
blinks as
pattern 5
Please confirm the Menu display on the
device.
–
Print jobs cannot start while running alignment.
Run the alignment or set cancel operation on
the device.
-
Wi-Fi Module
Failure
Wi-Fi Module Failure
Unplug and replug
the power cable.
It may be resolved.
and
blink as
pattern 1
Pull out the AC plug.
–
Wait at least 30 seconds, then reconnect the AC
plug back into the socket.
●
If this error occurs occasionally, visit our
website at
www.kodakverite.com/support
for the latest troubleshooting.
●
If you cannot solve the problem,
disconnect the AC plug and contact an
Authorized Service Center.
<This represents
that Weekly
Maintenance is in
progress.>
Weekly Maintenance
Please wait
until the job is
complete.
blinks as
pattern 1
This printer is in the process of Weekly
Maintenance.
–
This printer will automatically exit the Weekly
Maintenance mode upon completion of the
Maintenance.
–
If this printer receives a print job during Weekly
Maintenance, the print job will be processed
after maintenance is completed.
-
<This error is
displayed when
printer is
unrecoverable.>
Startup Failure
Please refer to
www.kodakverite.com/s
upport.
and
blink as
pattern 1
Software Update failed.
–
If this error has occurred, visit our website at
www.kodakverite.com/support
for the latest
troubleshooting.
82
English
Continued on next page.