5-4
DP5000 Series Printers
Chapter 5. Printhead Installation
DH5122 Printhead
DH5122 Printhead
Apply the following guidelines to a DH5122 printhead installation:
•
Remove the top cushion section from the printhead housing, mount
the housing on a printhead stand, and make sure it is secure before
starting the printhead installation.
•
Remove the printhead front and rear covers from the housing. A
single screw secures the covers.
•
Check the contents of the shipping container (see Table 5.3).
•
Read through the installation procedure in the printhead
Replacement
Instructions (0114252)
before removing the printhead from inner
printhead box. Handle the box carefully to avoid damaging the
printhead.
•
The box is secured with four Phillips screws.
•
Note the printhead serial number for the installation report. After
replacing the covers (the position of the cover screw can vary
slightly), continue with the procedures in Chapter 6, “Testing”.
Figure 5.3
DH5122 printhead in shipping container
Table 5.3
Printhead box contents, DH5122
Part Number
1
1.
Packaging components are not all marked with part numbers.
Description
0187923
Top Cushion Section
0187924
Bottom foam
0189959
Description Kit - Packaging
Printhead housing
Summary of Contents for VERSAMARK DP5120
