Installation Guide
6-3
Chapter 6. Testing
System Tests
Note: You can also print a test job from the Production screen.
Note: See the
Operator’s Guide
for printing procedures.
11. Check the print quality of the test patterns.
a. If test patterns do not print, check for tach and cue (see “System
Tests”). If print quality is poor, adjust the phase and voltage (see
“Printhead Adjustment”).
b. If the test pattern print quality is acceptable, the system is opera-
tional, and the installation is complete. Continue with the installa-
tion report.
System Tests
Use the following procedure to test the operation of the printing system:
1. Turn on the printer.
2. Press PRINTER ON on the operator panel.
3. Start diagnostics.
Summary of Contents for VERSAMARK DP5120
