12
DS5600 Series Printing Systems
Chapter 1. Overview
DS5600 Configurations
Figure 1.1 shows the different DS5600 series configurations.
Figure 1.1
DS5600 printing system configuration
Other system components such as the paper transport, cue sensor, tach
encoder, finishing equipment, and printhead mount(s) are dependent on
the specific combination installed.
The DS5600 series printing systems are identified as:
•
Kodak Versamark
DP5630 Printing System
Narrow-format printers and one or two DP5600 series print stations
with DH5300 Printheads
•
Kodak Versamark
DP5640 Printing System
Narrow-format printers and one or two DP5600 series print stations
with DH6240 Printheads
•
Kodak Versamark
DP5650 Printing System
Narrow-format printers and one or two DP5600 series print stations
with DH6300 Printheads
All configurations are compatible with the current model of the 38.5"
non-stitch printhead mount.
The specific installation and application requirements determine the other
system components required. This guide provides operating instructions
for a system with either narrow-format or wide-format printheads.
Note: The term DH6240 is used for the 4.27" printhead in some system
configurations, but that term is not used in this guide.
Second DP5600 series print station
CS150 on DS5600
CS150 on DS5000
or
DP5222
or
DP5340
2.13" DH5222
or
1.07" DH5340
DP5630
DP5640
or
DP5650
3.41" DH6300
2.77" DH5300
4.27" DH6240
or
Second, third and fourth printers
Summary of Contents for Versamark DP5630
