22
DS5600 Series Printing Systems
Chapter 2. Operation
Controller Operation
Menus and Screens
Operation of the system from the CS150 is done using selections under
the following main menu buttons:
The selections have the following functions:
Production
Used to select the files needed to print a job and do all other basic
operating procedures.
Configurator
Used to configure a new printer or print station.
Diagnostics
Opens the Diagnostics window (Figure 2.4) that is used primarily for
service procedures, but can be used to check the status of narrow-
format printers fluid and data systems.
Figure 2.4
Diagnostics window
Note:
The Diagnose selection on the main menu runs tests that check the
status of all devices (printers and print stations) connected to the CS150.
If a device is not communicating for any reason, it will show an error. A
device that is powered off will not communicate. This screen is also used
to remove a device from the setup (Figure 2.5). Consult a service techni-
cian before changing the system configuration or running diagnostics.
Figure 2.5
Devices menu, Diagnostics screen
Exit
Closes the CS150 software.
About
Provides the version number of the CS150 software.
Summary of Contents for Versamark DP5630
