44
DS5600 Series Printing Systems
Chapter 3. Messages
Message Displays
Message Displays
Errors are displayed in red text on the screen. Errors prevent printing by
taking the print station out of ‘
Ready to Print
’ status or by preventing it
from being put in that status (the ‘
Ready
’ selection inactive). Figure 3.3
shows a sample error message displayed during startup.
When any error occurs, press
F2
to display information about the error,
then press
F8
to clear the error. Serious errors cannot be cleared by
pressing
F8
. If such an error occurs, contact your service technician or
contact Kodak technical support.
Figure 3.3
Error message during startup
Message List
Messages are listed in alphabetical order. When more than one cause is
listed, the first is the most likely cause of the message. When more than
one action is given, each action should be taken in numerical order.
Check External Containers
Explanation:
The ink level has remained incorrect for 5 minutes. Possible cause: 1.
empty external supply; 2. tubing from external supplies; 3. external ink or
replenisher supply solenoid; 4. fluid controller board; 5. ink level switch.
Action:
1. Check the external supplies of ink and replenisher, and replace if
necessary.
2.
Check the tubing from the external supplies for kinks or breaks.
3.
If the error recurs, have a service technician run diagnostics to check
the solenoids and switches.
< Print Station Initialization >
Disk Drive check
available_bytes
Checking Station Type
Loading Station Data FLUID.TBL
Printhead Communication
Printhead Communication
Printhead Communication
Printhead Communication
Printhead Communication
Loading Ink Data
INKTYPE.VAL
Loading Ink Data
INKDEX.DAT
Loading Configuration
MACHINE.INI
Reading States Table
STATESEQ.TBL
Loading Help
FLUIDHLP.001
Loading Error Help
ERRORHLP.001
Loading O.T. Messages
MESSAGE.001
Charge Short Testing
Checking Station Speed
30 seconds Calibration
Calibration failed.
Pending error(s). Press any key to continue.
Messages
Summary of Contents for Versamark DP5630
