Print technology
Continuous inkjet
Maximum print width
17.92" (45.51 cm)
Resolution
300 x 300, 300 x 600
Finishing options
Roll-to-roll
Roll-to-fanfold
Roll-to-sheet/stack
Roll-to-slit/merge/stack
Speed
500 fpm (152 mpm) = 2,180 ipm (8.5 x 11 in.) / 2,052 ipm (A4)
750 fpm (228 mpm) = 3,272 ipm (8.5 x 11 in.) / 3,080 ipm (A4)
Paper handling
8"–20.5" (200 mm–520 mm) web width
Substrates
Pre-printed or blank, pinfeed or pinless roll-feed paper
Paper weight range
12*–42# bond (45*–160 g/m2)
*requires additional transport hardware
Controller options
Kodak Versamark
CS300c System Controller
– Input:
IPDS
– Connectivity:
TCP/IP (10/100/1,000 Mbps)
Kodak Versamark
CS410 System Controller
– Input:
IJPDS
– Connectivity:
TCP/IP (10/100/1,000 Mbps)
Other PDLs
PostScript
, PCL, PDF, AFPDS, LCDS,
Metacode
(available through
third-party converter)
Environmental operating ranges
For environments with relative humidity: 10%–90% non-condensing, the
temperature range is: 60°F–85°F (15.6°C–29.4°C)
For environments with relative humidity: 10%–60% non-condensing, the
temperature range is: 86°F–104°F (30°C–40°C)
Power requirements: 380V–480V 3 Phase; 50/60Hz
To learn more about solutions from Kodak:
Visit: graphics.kodak.com
Or in North America, call +1-866-563-2533
Printed using
Kodak
Technology.
Eastman Kodak Company
343 State Street
Rochester, NY 14650 USA
©Kodak, 2008. Kodak and Versamark are trademarks of Kodak.
Subject to technical change without notice.
U.CIJ.024.0808.en.04
Versamark
VX5000 Plus Printing System
Technical Data
