Chapter 2 How to use the menu
CVS-1410B
2-16
0093114105-03
1
Press the [MENU] key.
2
Select the [Display2]
→
[Detection area].
(See [2.1 How to operate the menu])
3
Press the [ ] key.
4
To display the Detection area, select the
[ON].
To stop the display of Detection area,
select the [OFF]. (Press the [ ] key or [ ]
key)
5
Press the [MENU] key to close the menu.
Caution: The beam angle of transducer
is different depending on the
transducer. (See [3.3 Setting of
Correct Item, Directirity angle
(Low/High)].)
Setting of Scale display
The set of the scale display
1
Press the [MENU] key.
2
Select the [Display2]
→
[Scale display].
(See [2.1 How to operate the menu])
3
Press the [ ] key.
4
Select the [Scale display]. (Press the [ ]
key or [ ] key)
5
Press the [MENU] key to close the menu.
Change the scale value
The display size of the scale value can be
changed.
1
Press the [MENU] key.
2
Select the [Display2]
→
[Scale]. (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Select the [Scale]. (Press the [ ] key or
[ ] key)
5
Press the [MENU] key to close the menu.
Change the image direction
Selects the direction of display image.
1
Press the [MENU] key.
2
Select the [Display2]
→
[Image direction].
(See [2.1 How to operate the menu])
3
Press the [ ] key.
4
Select the [Image direction]. (Press the [ ]
key or [ ] key)
5
Press the [MENU] key to close the menu.
Setting of Depth measurement
Selects the method for depth measurement,
which is shown on the display.
1
Press the [MENU] key.
2
Select the [Display2]
→
[Bottom detection].
(See [2.1 How to operate the menu])
3
Press the [ ] key.
4
Select the [Bottom detection]. (Press the
[ ] key or [ ] key)
5
Press the [MENU] key to close the menu.
Change the display color
The display color can be changed.
1
Press the [MENU] key.
2
Select the [Display2]
→
[Color table 1] or
[Color table 2]. (See [2.1 How to operate
the menu])
3
Press the [ ] key.
4
Select the [Color table]. (Press the [ ] key
or [ ] key)
5
Press the [ ] key.
6
Select the color. (Press the [ ] key or [ ]
key)
7
Press the [MENU] key to close the menu.
Setting of Key lock
Disables the functions of controls and keys to
avoid deviation of these settings by
unintentionally touching them during operation.
1
Press the [MENU] key.
2
Select the [System]
→
[Key lock]. (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Select the [Key lock]. (Press the [ ] key or
[ ] key)
5
Press the [ ] key.
