2-10
OPERATION KEYS
OPERATION MODE KEYS
Use these keys to select one of 2 kinds of operation mode you have created.
(You may
be able to create 4 kinds of operation mode by FUNCTION SETTINGS.
page 3-15)
By pressing one of these keys, the desired operation mode can be set immediately.
To memorize the setting in the Operation Mode key, the following procedure is required.
•
Create your own setting of operation mode.
•
Exit Menu.
•
Hold the Operation Mode [1] or [2] key for 3 seconds until you hear a beep. The operation
mode that you have created is now memorized in the Operation Mode key. Note that it may
not be memorized when the key is released before you hear a beep.
•
By pressing the Operation Mode [1] or [2] key, you hear a beep and the desired operation
mode appears on the screen instantly. Note that you hear 3 beeps and nothing changes
when pressing the Operation Mode [1] or [2] key memorized nothing.
•
You may adjust the setting while one of the operation modes works, however pressing one
of the Operation Mode keys again returns to the previous operation mode.
•
It is possible to memorize the present setting in the Operation Mode keys by holding the key
for 3 seconds.
•
The Operation Mode key number appears on the screen.
CF
Summary of Contents for ESR-145
