Chapter 1 Installation
KGC-222
1-10
0093822202-01
To prevent the tension hanging over the connector junction, the cable shall be fixed as
described in the illustration below.
Connecting the 60m antenna cable kit CW-394.KIT to GPS antenna
The optional 60 m length cable kit, CW-394.KIT, is composed of the Antenna cable
CW-394-60M and the N-to BNC conversion connector. Connect the GPS antenna and Display
unit via the cable kit as shown in the following figure.
(1) Connection at GPS Antenna side
(2) Connecting the Display unit
To GPS antenna
Conversion connector
NP-BNCP
To Display unit
Waterproof the jointing section using self-bonding
tape and PVC tape. (Refer to page 1-9 for detail)
Antenna cable
CW-394-60M
To GPS antenna
Cut the cable to a required length and
attach the type N plug to its end.
To ANT 1 or ANT 2
connector at Display
unit
Connecting cable
CW-826
Antenna cable
CW-394-60M
Type N connector
N-SJ-8DSFA
Connector junction
Fix the cable by forming a loop on the mast.
